Apply 2ndcoat of cetol door window 5.
How to apply sikkens cetol door and window.
Buy sufficient product for the whole job and intermix all product together before starting to avoid color and sheen variance.
New weathered uncoated wood.
Before starting test your color choice on a small area applying all coats required.
Stir well before and during use.
Wet surface with clean water.
Maintain a wet edge to prevent lap.
Let surface dry for minimum of 24 hours 4.
Apply one 1 coat of cetol door window wood finish.
Do not apply cetol door window over other coatings.
For best uv protection apply three coats of ready mix color.
Cetol i cetol 23 plus.
Let surface dry for minimum of 24 hours 6.
Wash with four ounces of 100 powdered tri sodium phosphate tsp or phosphate free substitute plus one.
Sikkens cetol door window apply when the surface and air temperature is 50 f 10 c to 95 f 35 c stir well before using do not apply in direct sunlight saturate all end grains nail holes and cracks in the wood apply a medium coat using a soft long haired natural bristle brush maintain a.
Let the surface dry for three 3 days after power washing.
Saturate all exposed grain ends and knot holes.
During application saturate all end grains nail holes and cracks in the wood.
Sikkens proluxe cetol door window application instructions 1.
Use your natural bristle brush to work on a warm day with humidity less than 80 percent.
Removed before application of cetol door window.
Apply 1stcoat of cetol door window 3.
The best method to prepare.
Clean the surface with a solution of four ounces of 100 powdered tri sodium phosphate tsp.
Spray the surface with clean water wetting the wood.
Cetol door window.
Apply a primary coat of cetol 1.